I’ve been getting random bluescreens after a recent RAM upgrade. The errors mention “IRQL_NOT_LESS_OR_EQUAL”. I ran MemTest86 and got a few failures on stick #2. Any advice on how to pinpoint the issue? Should I reseat the modules or consider a BIOS update?
Troubleshooting Memory Errors & Bluescreens
Make sure the RAM is running at its rated speed in the BIOS. Enable XMP or manually set the timings. Also, clear the CMOS after installing new modules. If the problem persists, try each stick individually in the primary slot to see if one is faulty.
I had a similar case where the motherboard’s voltage regulator was unstable with higher density RAM. Updating the BIOS to the latest version solved the stability issues. Check the motherboard’s QVL for compatible modules.